High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes a lot of energy. For instance, there are tons of problems with the old card key switches. Guests can put any card within the old switches, or they might ask for more than one card. Even though hotel desk refuses to provide more than one card to a guest, she/he may claim to have lost the card.
The traditional old technology of hotel card switch. There is also a lot of over intake of lights and AC energy as a result of things running even if guests aren’t within their rooms, which could cause a monetary loss for your owner. Of course, no hotel owner desires to prohibit guests from using a comfortable stay, nor do owners expect guests to enter a dark or cold hotel room. Nobody is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC from your main network, less energy will be consumed, while some believe that motion sensors are definitely the solution. However, these approaches forget to resolve the problem. The AC is easily the most energy-consuming device of, and motion sensors could be nightmares since they only function according to movement detection, which means the AC and lights might go off while a guest is sleeping or reading a novel. Nightmarish!
The TIS Automation Company supplies the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its ability to detect human presence in a room. This ceiling-mounted sensor has numerous options, together with a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new way for hotel energy saving technology. By installing this door sensor on the entrance to some room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is completely resolved.
The subsequent logics can be defined for this particular sensor to control room energy with no discomfort for guests:
Logic 1: If you have any movement inside the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will activate for one minute to see if there exists movement in room. If no movement is detected after 1 minute, the program will activate energy-saving mode. This is valuable in situations each time a guest enters the space briefly. In energy-saving mode all lights are off aside from a nightlight, which stays on for three hours in case there is certainly another guest taking a nap. Also, the AC will not be turned off, however its temperature will be decreased by 2 degrees. It will help save energy over time.
Logic 3: When the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC will be turned off automatically. It is also possible to define lower temperature levels for that AC. Additionally, the Energy Servant can turn the AC on/off if this understands that a balcony window/door is open. All this requires is adding a magnetic contact connected to the balcony window/door and programming the preferred smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if you have enough natural light.
Another practical and beneficial ability of this sensor is its built-in thermostat, that helps maintain the right temperature constantly. This will be significant for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for a long period, humidity and bad smells is not going to be a problem inside the room. This sensor may be developed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen repeatedly during the day if required. A comparable performance could be programmed in cold spots to stop mold.
Another choice of the smart device is TV control. In the event the hotel supplies the guest with a room tablet, she/he has the capacity to control the room’s TV by using it. This sensor was set up in 20 rooms within the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and several satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the chance to meet both hotel owners and guests interests and requires with just a couple items and in probably the most energy efficient way possible. For additional information or plan a consultation, give us a call at www.tiscontrol.com